Fiber End-Cap
Neptec’s High Power Fiber End-Cap is designed for output termination of fiber lasers and fiber amplifiers to reduce power density at the fiber facet. Neptec’s unique design features a cladding light stripper is built inside in order to remove the reflection power in the fiber inner cladding. Without a high-power fiber end-cap, high optical power can easily damage the optical fiber.
As with all of Neptec’s products, Neptec’s Fiber End-Cap can be custom designed and manufactured for any specific application. If the standard Fiber End-Cap below does not fit your application, we would be glad to review your specifications and quote a custom one for you.
Product Information
Key Features
• High Signal Transfer Efficiency
• Built-in Cladding Light Stripper
• Low Beam Distortion
• Customized Configurations Available
Applications
• High Power Fiber Laser
• Collimators
• Sealing PCF
Specifications
| Parameter | Unit | Typical | Notes |
|---|---|---|---|
| Operating Signal Wavelength | nm | 1030 to 1080 | |
| Power Handling | W | ≤3000 | Core Power |
| End-Cap Length | mm | 20 | |
| End-Cap Diameter | mm | 8.2 | 0dBm @ 1550nm |
| Facet Angle | ◦ | 0 | Selectable |
| Fiber Length | m | 2 | Different Lengths Available |
| Loose Tube | m | 0.5 to 0.6 |
Electrical and Environmental Characteristics
| Parameter | Unit | Typical | Notes | Operating Temperature Range | °C | (-20) to 70 |
|---|---|---|---|
| Operating Humidity Range | % | 5 to 95 | |
| Storage Temperature Range | °C | (-40) to 85 | |
| Dimensions | mm | Φ14/8.2x70 |
