Follow us on:

+1 (510) 687-1101 | info@neptecos.com

Pass and Protect Optical Tap Modular Network Surveillance

Description

The Neptec Optical Solutions line of network surveillance modules provides parallel passthrough and monitoring of network traffic. The Pass’n’Protect Optical Tap system delivers total traffic visibility for network monitoring and security administration tools. The modular nature of this high-density rack mount chassis system can house a mix of Optical Tap modules, up to 24x–10G Taps or 12x–40G/100G Taps

  • Tap with Full-Duplex Signal Monitoring
  • Low-Loss Passive Optical Performance
  • Data Rate independent & Protocol Agnostic
  • 24x–10G Single-Wide Tap Modules (10G/40G)
  • 12x Double-Wide Tap Modules (40G/100G)
  • No Electrical Power Required

Features

  • Constant, Continuous Network Access, w/o Line Power
  • Meets High-Density Needs of Future Deployments
  • Built with OM3 MM Fiber to support current SFP+ reach
  • 24x Modules per 1RU Chassis

Solution

  • Highest-reliability tap components provides Ever-On network access with complete visibility to traffic
  • Tap with Full-Duplex 10G-SR/LR, 40G/100G-LR4 Signal Monitoring (LC conn.)
  • Placement of all connections on the front panel minimizes connection errors by enabling simultaneous visual and physical grouping of inputs and outputs.
  • Sliding Snap-Lock Securely Mounts Module in Chassis, regardless of full or partial chassis usage.
  • Durable handle allows for ease of installation and provides a guide to route cable across the face of the module to the rack side-rail.
  • Connections/Link use standard Type-B cabling.

Tap Fiber Mapping for LC Connector *

  • LC A (RX) to LC B (TX)
  • LC B (RX) to LC A (TX)
  • LC A (RX) to Tap A Out
  • LC B (RX) to Tap B Out

Features

  • Constant, Continuous Network Access, w/o Line Power
  • Meets High-Density Needs of Future Deployments
  • Built with OM4 MM Fiber to support the longest reach
  • 12x Modules per 1RU Chassis

Solution

  • Highest-reliability tap components provides Ever-On network access with complete visibility to traffic
  • Tap with Full-Duplex 40G-SR4 or 100G-SR10 Signal Monitoring (MPO conn.)
  • Placement of all connections on the front panel minimizes connection errors by enabling simultaneous visual and physical grouping of inputs and outputs.
  • Sliding Snap-Lock Securely Mounts Module in Chassis, regardless of full or partial chassis usage.
  • Durable handle allows for ease of installation and provides a guide to route cable across the face of the module to the rack side-rail.
  • Use the provided Y-Cable to separate & connect the Taps to the Network Analyzer

Tap Fiber Mapping for MPO Connector*

40G QSFP+ Taps

  • MPO A (09:12) to MPO B (01:04)
  • MPO B (09:12) to MPO A (01:04)
  • MPO AB (01:04) = Tap A Out
  • MPO AB (09:12) = Tap B Out

100G-SR10 Taps

  • MPO A (02:11) to MPO B (14:23)
  • MPO B (02:11) to MPO A (14:23)
  • MPO AB (02:11) = Tap A Out
  • MPO AB (14:23) = Tap B Out

Ordering Info

PIN Description Notes
PPOT-Chassis 1RU 19” Chassis, 6-Slots, Holds 4x Single Modules or 2x Dual Modules per Slot. Required for first PPOT module
PPOT-Blank Cover for Empty Chassis Slot 5pcs included with Chassis.
  Single-Wide with LC Connector  
PPOTLCSR-50 50/50 Tap, with MM OM3 fiber and LC connectors, Single-wide module. Supports 10G-SR. IL: Max 4.3dB; Typical 4.0dB*; 850nm.
PPOTLCSR-30 70/30 Tap, with MM OM3 fiber and LC connectors, Single-wide module. Supports 10G-SR. IL: Max 2.7/6.6dB; Typ. 2.4/6.3dB*; 850nm.
PPOTLCLR-10 90/10 Tap, with SM OS1 fiber and LC connectors, Single-wide module. Supports LR & LR4. IL: Max 1.4/11.8dB; Typ. 1.2/ 10.8dB*; 1310nm
PPOTLCLR-50 50/50 Tap, with SM OS1 fiber and LC connectors, Single-wide module. Supports LR & LR4. IL: Max 4.2dB; Typ. 4.0dB*; 1310nm
  Double-Wide with MPO (Male) Connectors  
PPOT40SR-30 70/30 Tap, with MM OM3 fiber and MPO(m) connectors, Double-wide module. Supports 40G-SR4. IL: Max 2.7/6.6dB; Typ. 2.3/6.2dB*; 850nm
PPOT40SR-40 60/40 Tap, with MM OM3 fiber and MPO(m) connectors, Double-wide module. Supports 40G-SR4. IL: Max 3.7/5.7dB; Typ. 3.3/5.4dB*; 850nm
PPOT40SR-20 80/20 Tap, with MM OM3 fiber and MPO(m) connectors, Double-wide module. Supports 40G-SR4. IL: Max 1.7/12.2dB; Typ. 1.4/ 11.0dB*; 850nm.
SR4YCABLE 40G-SR4, Y-Breakout to 1-4 and 9-12, 12-F MPO(m) with MM OM3 IL: Max 0.5dB; Typ. 0.3dB*; 850nm
PPOT100SR-30 70/30 Tap, with MM OM3 fiber and MPO(m) connectors, Double-wide module. Supports 100G-SR10. IL: Max 3.7/7.6dB; Typ. 3.2/7.1dB*; 850nm
PPOT100SR-40 60/40 Tap, with MM OM3 fiber and MPO(m) connectors, Double-wide module. Supports 100G-SR10. IL: Max 4.3/6.3dB; Typ. 3.8/5.8dB*; 850nm
PPOT100SR-20 80/20 Tap, with MM OM3 fiber and MPO(m) connectors, Double-wide module. Supports 100G-SR10. IL: Max 3.0/9.4dB; Typ. 2.5/8.9dB*; 850nm.
SR10YCABLE 100G-SR10, Y-Breakout to 2-11 and 14-23, 24F MPO(m) with MM OM3 IL: Max 0.8dB; Typ. 0.5dB*; 850nm.